DESCRIPTION
When selecting the best floor coating for an area within a commercial or industrial facility, the conditions to which the area will be exposed must be considered. For permanent, thin concrete repairs use a.b.e.® rep 710. Ideal for levelling or smoothing rough or worn concrete. Floor patching concrete repair up to 6 mm (do not feather-edge). Floor underlayment. Flooring for light traffic. Advantages include self-bonding, no curing required and no priming necessary. Used on concrete substrates for interior or exterior use. Can be used above and below grade.
PRODUCT SELECTION
PRODUCT
APPLICATION TIME
TYPE OF FINISH
TYPE OF SOLUTION
a.b.e.® cote tough epoxy paint
Overcoat: 4 hours,Hard dry: 24hours
different colours, epoxy
2-part epoxy paint, on dry or damp substrates
a.b.e.® cote clear Polyurethane top coat
Overcoat: 2 hours, Hard dry: 24hours
different colours, polyurethane
1-part PU paint, only dry substrates
a.b.e.® clear tough Polyurethane paint
Overcoat: 6 hours, Hard dry: 24hours
clear, polyurethane
2-part top coat for floor coverings: epoxy/PUcoatings, concrete, screeds, tiles, paving,etc.
a.b.e.® seal finisol concrete sealer
Overcoat: 4 hours, Hard dry: 24hours
clear, acrylic emulsion
1-part, concrete sealer that is moisture insensitive (tolerant)
a.b.e.® flooring resin primer and sealer forcement floors
Overcoat: 12 hours,Hard dry: 24hours
clear, epoxy
2-part, primer and sealer for cement floors