Two part flexible waterproofing slurry.
duraﬂex® is ready to use ﬂexible slurry based on a special synthetic resin dispersion and a blend of selected cement mixed with carefully graded aggregate.
- Protection and repair of balconies, terraces and haunching concrete structures and bridges.
- Waterprooﬁng of new and old buildings (internal and external).
- Waterprooﬁng of showers, tanks, containers and water reservoirs.
- Can be painted and covered with tiles.
- Can be applied for damp prooﬁng.
Excellent waterproof barrier.
- Effective on negative or positive side.
- High bond strength.
- Excellent freeze/thaw resistance.
- Excellent resistance to chloride on penetration.
- Brush, trowel, or spray applied.
- Reliable application.
- Resistance to water pressure (after seven days’ cure): Positive pressure of 10 atmospheres, negative pressure of 4 atmospheres.
- May be applied on damp surfaces.
- Low in place cost.
- Good abrasion resistance.
- Approved for use in potable water systems.
Download Technical Datasheet and view table under properties.
All surfaces to be clean, dry, sound, free of all laitance, grease, oil, fungal growth and loose and ﬂaking particles that might affect adhesion. Concrete may require grit blasting. Cracks less than 0.3 mm in width can be coated as long as the crack is not likely to open up more than 0.3 mm.
Cracks greater than 0.3 mm in width should be chased-out to 4 mm in width and ±15 mm in depth. This should be ﬁlled with duraﬂex® (applied using less liquid providing a thicker consistency). When material in the crack has hardened the coating should be applied over the crack.
Bonding / Priming
No priming required.
It is essential to use a mechanical mixer, such as a slow speed electric drill ﬁtted with a suitable paddle.
Fill approximately three quarters of component A (milky liquid) into a pail and, with continuous stirring, slowly add component B (grey powder).
Mixing must be continued until the mix is homogeneous and free of lumps.
For horizontal surfaces such as the base of reservoirs, add the remaining component A. For other applications add only sufﬁcient component A to provide a suitable consistency. When the two components are mixed together, a plastic thixotropic liquid results which is easy to apply.
8 m2/15 kg for 1 mm wet ﬁlm thickness. Minimum coverage of 2 kg/m2/mm, applied in not less than two coats.
duraﬂex® may be applied with a short bristled brush, rubber squeegee, trowel or spray.
Brush: Should be applied in three coats to provide a ﬁnal dry ﬁlm thickness of 2 mm to 3 mm on the surface. Alternate coats should be applied at right angles to each other, allowing 16 hours between coats.
Trowel: First coat should be applied at a thickness of 1 mm to 1.5 mm using a normal trowel. Allow to cure for 16 hours. Second coat should be applied by using a notched trowel and levelled immediately by using a spiked roller.
Reinforcement with abe.®mesh
abe.®mesh may be incorporated to reinforce the duraﬂex® at joints and cracks.
abe.®mesh should be bedded into the first coat while still wet. Immediately after placing apply a further thin coat of duraﬂex®.
to ‘wet’ out the abe.®mesh.
Allow the first coat to set before applying the second coat.
Tools, brushes and mixing equipment should be cleaned immediately after use and before material has set with abe® super brush cleaner followed by washing with soap and water.
Protection / Maintenance on completion
duraﬂex® may be left as is, be tiled over or overcoated with a high quality PVA/acrylic paint.
5 kg and 15 kg (two part).
Handling & Storage
Shelf life of six months, but shorter if in extreme conditions. Keep tightly sealed in a dry cool place in the original packaging.
It it essential to use a mechanical mixer, such as a slow speed electric drill ﬁtted with a FESTO mixer that has a helical coil mixing head for best results.
Health & Safety
Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels for safe use, physical and health hazard information. The safety data sheet is available from your local a.b.e.® Construction Chemicals branch.