Two part professional instant bonding system.

abe®joiners mate mitre bond is a two part professional instant bonding system comprising an adhesive and aerosol activator. 



abe® joiners mate mitre bond is ideal for use on all cornice and profile mitres, trims, picture frames, skirting and architrave joints, worktop end strips, PVCu trims and much more. 

Suitable for bonding:

  • MDF (Medium Density Fibreboard) 
  • Wood and timber 
  • Rubber 
  • PVCu (Window Plastics) 
  • Metal 
  • Most Plastics
  • Simple to use
  • Bonds in 10 seconds
  • Super fast adhesion

Service Temperature: -60ºC to +80ºC

Surface Preparation

The surfaces to be glued should be clean, free from dust, grease and TOTALLY DRY. 

Bonding / Priming

No priming is required.


    Ensure surfaces are close fitting. Spray activator onto one surface only and allow to evaporate. 

    Apply adhesive onto the other surface. Assemble and hold for 10 seconds, curing will be almost instantaneous so exercise care when aligning. 


     abe® joiners mate mitre bond is supplied in a kit comprising of 50g adhesive and 200ml activator. 

    Handling & Storage

    Approximately 12 months when stored in a cool, frost free place, less once opened. Store away from direct sunlight.


    Do not use externally on PVCu when moisture is present in the atmosphere or the PVCu is not totally dry. Contact with moisture during application can cause discolouration of the PVCu. 

    This product is not suitable for permanent glass bonding or applications where the bonded joint may be immersed in water.